Clean Your Showerhead Without Toxic Chemicals

That low-flow showerhead which was working fine now slowing down to just a trickle? It’s probably because of a build-up of calcium and other minerals in your local water supply. The nozzles get clogged up and water can’t be pushed through them anymore, potentially leaving you standing in a drip-like shower with soap in your hair. But don’t fear, as there is an incredibly easy way to clean that showerhead without using any toxic chemicals (or probably even spending any money) with something you might already have in your house — vinegar.

All you need to do is half-way fill up a plastic sandwich bag with a 50% water and 50% vinegar solution and put your showerhead in the bag to soak for a while. You can take the head out of the shower if you want, but I just leave it on there and use a rubber band (preferable) or a zip tie (2nd choice) to hold it up. This is what it looks like:

I usually let it soak in this solution for a 1/2 of a day or so, and then let the water run through the showerhead for a few seconds once I am done. Voila – all clean and back to the way it was when it was installed. Vinegar serves so many purposes around the house, so it’s always a good idea to keep some on hand just in case.

Be Sociable, Share!

• 

Related posts:

1. How To Disinfect Without Using Toxic Chemicals.
2. 9 Ways To Use Essential Oils In Place Of Toxic Chemicals.
3. Spring Cleaning 101 – The Natural Way To Unclog Your Showerhead.
4. Why Call It Cleaning If We Just Spray Toxic Chemicals All Over The House?
5. Polish And Clean Metal With Common Nontoxic Household Products.

Like this post? If so, please consider subscribing to my full feed RSS. Or, if you would prefer, you can subscribe by Email: