5 Easy Steps to Save Water

Although it may seem like we have an infinite supply of water, the truth is that drinkable water is a shrinking commodity. In fact, in the next fifty years, freshwater is set to decrease by over 30%, due to a combination of rapid population growth and alarming changes in weather patterns. But slowly, awareness is spreading, and it’s never been easier to do your bit. And, along with helping to save the planet, saving water will also help reduce your energy bills. Here, then, are five simple and effective ways to save water in your home.

1. Take showers rather than baths

On average, a single bath uses at least 40 gallons of water, and that’s only when you first fill it. Most people like to top it up with hot water as the bath cools down, so in the end you could be looking at well over 50 gallons of water used. Showers, though, use far less (as long as you don’t stay in too long). With a low-flow shower head installed, you could be using as little as 10 gallons of water per shower.

2. Collect rainwater with a water butt and pump

It may not be fit for drinking, but collected rainwater can really help lessen your water consumption when it comes to outdoor activities like watering the garden or running a sprinkler. Attaching a drainpipe to a water butt is as simple as it gets, and, with a submersible pump like the kind manufactured by companies like Lowara, you can really widen the range of uses for your collected rainwater.

3. Install a low-flush toilet

Toilet flushing is responsible for more water consumption than any other home activity. With old toilets, a single flush can use up to 7 gallons, so every homeowner’s priority should be to install a newer, more efficient model, which can use as little as 1.6 gallons per flush.

save water

4. Fill the washing machine or dishwasher

If your dishwasher or washing machine doesn’t have a setting to accommodate smaller loads, always make sure you only wash with full loads. This can make a huge difference to your water consumption, saving between 300 and 800 gallons per month.

5. Fix any leaks

While a leaking tap may seem like a minor problem, it can lead to massive water loss. One drop of water per second, for example, can mean an annual loss of almost 3,000 gallons. The good thing is that a leaking tap is usually extremely easy to fix; with plenty of DIY guides available, and easy-to-order spare parts, it may not even be necessary to call a plumber.

Image by dr_relling

4 thoughts on “5 Easy Steps to Save Water”

  1. If you are taking a shower, here is another way to save water: It takes some time for our shower’s hot water to reach the desired temperature. So, when we turn on our shower, we place a plastic bucket in the shower to catch the water. It usually takes a half a bucket, and by then the water is warm enough for our shower. That half bucket is used to water in the garden. Multiplied out by the number of showers and number of people in our family, we save enough water to water all our potted plants in the front and back yards. We also keep a bucket in one of the halves of our kitchen sink and capture all the water used to rinse fruits and veggies.


Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.